Residents said that before replacement, the courtyard use of the fitness device is the device after the year 2002, using the term of four years, outdoor fitness equipment, used in the end, everyone came to worry. According to the staff, Nam Sports Bureau, comprising Jinhu including the 3rd, this year the area to create or replace 86 health approach, which is the City District Office and an element of practical things to do. Reporters from the Municipal Sports Bureau, the collective Department understands that now, Castle nonprofit Fitness Approach mostly funded Lottery Fund, the Municipal Sports Bureau and Finance Bureau agreed through open tender procurement, outdoor fitness equipment, and then donated to the district municipal sports administration sector. Donation agreement basis, the successful company as in the device using the maintenance period, the recipient unit acted as the use of the device, protection and property rights apply, and eliminated or replaced in accordance with the actual situation, but the actual operation, is not satisfactory. Construction Technology 1 artificial turf, inspection and acceptance infrastructure projects. Clear the basis of this debris, if uneven Department, should be repaired, leveled. 2, the use of steel tape measure, measure the size of the stadium surrounding the facility meets, if not appropriate office to make changes. 3, pavement pavement: (1) non-woven fabric laying sites along the longitudinal direction, the direction to be aligned with the alignment lawn at 90 degrees, strong adhesion between the nonwoven fabric. (2) according to the length and width of the line drawing specifications court ruled lines, lines through self-examination after a good stick must be straight. (3) turf according to the specifications of the original stone tile on top of non-woven fabrics, to be 3-8mm overlap between the turf. (4) The overlap of turf cut flush with the cutter. Joints should be no more than 3mm. Prepare lawn before bonding the bonding process: 1, shall turf bottom surface to be bonded, non-woven fabrics, seams and other clean cloth, and the surface dry and free of moisture. 2, the ambient temperature should be chosen above 5 ℃ construction is appropriate, furthermore, not construction in the rain and rainy weather, outdoor fitness equipment maintenance, otherwise it will lead to the bonding time is too long even cause non-stick phenomenon. Specific construction process: (1) coating: Requires surface painted with a brush in his uniform thickness, can not be repeated coating, otherwise blistering, even fall. Base fabric coated with glue, and strictly control the thickness of the glue, outdoor fitness equipment, accessories, pay attention to the appropriate coating speed, coating should be applied to each of the two bonding surfaces are bonded. (2) Adhesion: according to the prevailing temperature, humidity, barometric pressure and other conditions of the real impact of the show, the reasonable control of open time. Generally within 10-30 minutes after the glue, mortar reach eight or a dry non-stick hand touch is appropriate. It requires a one-time alignment of cement when bonding. The adhesive must not be bonded later moved back object. (3) Pressure: After the adhesive, remove surface debris, with a special hard rubber hammer hammer from the adhesive to the sides of the solid, its surface full access to dense, stronger bonding. Outdoor fitness equipment, abundance and Information Technology Center (online consultation), outdoor fitness equipment provided by the Shenyang City HSBC and Information Technology Center. Shenyang City HSBC and Information Technology Center (www.4000010001.com) (www.tz1288.com) is Shenyang, IT project co-leader, over the years, the company is implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, the maximum Limits to meet customer needs. In abundance and IT central leadership with the staff warmly welcome all inquiries negotiations to create abundance and IT center a better future.